SimFalcon Installer-grade IoT connectivity
```
CCTV SIMs for 4G cameras, routers & remote sites

CCTV SIM cards from £18/month for 4G cameras & routers

Professional IoT SIMs for CCTV cameras, 4G routers, farms, yards, construction sites and remote video systems. Choose from 5GB, 10GB and higher-data plans, or send us the device model and postcode and we will recommend the right option.

No PAYG top-up hassle
For unattended CCTV equipment
Multi-network options available
Fast advice by WhatsApp
  • For 4G CCTV cameras, routers, mobile towers and remote surveillance
  • Plans from 5GB upwards depending on viewing and upload usage
  • Ideal for farms, yards, compounds, construction sites and broadband backup
  • Not sure? Send your camera/router model and postcode for a quick recommendation

Choose a CCTV SIM plan

CCTV usage varies massively. A camera sending motion clips is very different to a router feeding multiple cameras. Start with the closest plan below and we will confirm before activation.

Light CCTV use

5GB CCTV SIM

£18 / month

Best for motion alerts, snapshots, short clips and occasional remote viewing.

  • ✓ Good starting point for low-use CCTV
  • ✓ Suitable for many single-camera deployments
  • ✓ No consumer PAYG top-up routine
Higher data

Higher-data CCTV/router

from £49 / month

For heavier CCTV use, 4G routers, multiple cameras, site systems or more frequent uploads.

  • ✓ Better for router-based CCTV
  • ✓ More suitable for heavier viewing
  • ✓ Useful for remote yards and construction sites

Not sure how much data your CCTV system will use?

Send us the camera/router model, number of cameras and postcode. We will recommend a sensible starting plan. For CCTV, it is usually better to choose a plan with enough headroom rather than create a failed installation with a SIM that is too small.

Why normal PAYG SIMs are risky for CCTV

Consumer SIMs can work at the start, but they are not designed for unattended CCTV equipment sitting in a camera, router or remote enclosure. That can turn into unnecessary call-outs, angry customers and wasted time.

Top-up and inactivity problems

PAYG SIMs can create admin problems, missed top-ups or unexpected service issues when nobody is watching the account.

Wrong usage profile

CCTV data usage can spike when customers view footage, upload clips or connect multiple cameras through a router.

Installer call-backs

When a SIM becomes the weak point, the installer is often the person who gets called back to site.

Typical CCTV SIM use cases

Where SimFalcon CCTV SIMs are usually needed:

Construction sites

Temporary cameras, site cabins and rapid deployments where fixed broadband is unavailable.

Farms & rural yards

Remote monitoring where signal and reliability matter more than a normal consumer phone SIM.

Compounds & facilities

Standalone CCTV or backup connectivity when fixed broadband is unavailable or unreliable.

Mobile CCTV towers

Trailers and towers that move between sites and need a professional connectivity option.

4G routers

Router-based CCTV systems with higher data and multiple connected cameras or devices.

Remote gates and yards

Locations where CCTV sits alongside gate, alarm or access-control equipment.

How it works

Fast and simple for CCTV installers, site owners and remote equipment users.

1

Send the basics

Device model, postcode or country and number of SIMs.

2

Pick a likely plan

5GB, 10GB, higher data or “not sure”.

3

We confirm suitability

We check the usage pattern and recommend the right starting point.

4

Install and monitor

The SIM goes into the camera or router and usage can be reviewed if needed.

Get your CCTV SIM quote

Fill this in once. It now submits directly to SimFalcon, sends the enquiry by email, and then redirects to the thank-you page.

Please enter a valid email address or phone number so we can reply.
Or WhatsApp device photo
Fastest route: WhatsApp us a photo of the camera/router label plus the postcode.
By submitting this form, you are asking SimFalcon to contact you about CCTV SIM connectivity. We do not need long technical details at this stage.

Quick FAQ

Which CCTV SIM plan do I need?

Most customers choose 5GB for alerts, clips and occasional viewing, 10GB for more regular viewing, or a higher-data plan for router or multi-camera use. If you are not sure, send us the device model and postcode and we will recommend the best option.

Can I use a SimFalcon SIM in a 4G CCTV camera or router?

Yes. SimFalcon supplies specialist IoT SIMs for 4G CCTV cameras, routers, remote sites, farms, compounds, yards and mobile surveillance systems.

Why not use a normal PAYG SIM for CCTV?

Consumer PAYG SIMs are not designed for unattended CCTV equipment. They may require top-ups, be affected by inactivity rules, have unsuitable usage policies or create avoidable call-outs when something stops working.

Do you offer multi-network CCTV SIMs?

Multi-network options are available on selected plans and are useful for sites where coverage is difficult or where resilience is important.

What information do you need to quote?

We usually need the postcode or country, camera or router model, number of SIMs and whether the system is mainly used for alerts, clips, regular viewing or heavier data.

Need a fast answer?

WhatsApp us a photo of the camera or router label, postcode or country, and quantity. We will advise quickly.

WhatsApp